ADEMCO 4140XM Specifications download pdf (Page 6)

SECUR9TY CODES

General

Duress Code

Quick Arming

❑

Askyour

installer if ‘Quick

Arming” is active

for your system, and if

so, check here,

At the time of installation, your installer programmed a personal four-digit Master

code, known only to you and yours. This code is used to perform most system

functions, including arming and disarming of the system. As an additional safety

feature, temporary user codes can be assigned (see next page) for use by those

not having a need to know the Master code. Note that the Master code remains in

effect even when other user codes are assigned.

This feature is intended for use when you are forced to disarm or arm the system

under threat. When used, the system will act normally, but can silently notify the

central station of your situation, if that service has been provided. The Duress code

is the same as your user code, except that the last digit is increased by one. For

example, if the normal security code is”1 23 4“, the Duress security code is” 1235.

Important: This code is useful only when connected to a central station. User

codes that end in “9” (ex. 6349) cannot activate a duress alarm (i.e., 6350 is not a

duress alarm code).

If your system supports “Quick Arming”, the “#” key can be pressed in place of the

security code when arming the system. The security code is a/ways required,

however, when disarming the system.

-6-

1 2 3 4 5 6 7 8 9 10 11 ... 43 44

No comments

ADEMCO 4140XM Specifications Page 6