ADEMCO 4160-12 C-COM User Manual

CUSTOMER CUSTCHER NOTE: A. RAME CUST. NO. iDDRESS Program the numbers that you write into the boxes except for double boxes,where you p

PROM Data Group 12 To program, set Rotary Switch to Position 9 ("Open/Close") and set switches for checked boxes as indicate

PROM Oata Group 14 To program, set Rotary Switch to Position 11 ("Not Used") and raise switches for checked boxes representing

Hexadecimal Codinq-Chart Code WV 1 2 3 4 5 6 7 Bit Weight Ilit ueight 1 2. 4 a 1 2 4 8 a 9 B(l1 C(12 D(13 E(14 F(15 CAUTION: Throughout thes

Zn 5 = Audible Panic, Zn 6 = Burglary: [Ti fn 5 = Audible Panic, Zn 6 = Audible Panic: 3 m III 10. Alarm Sounder Options: Check Cn

6. Comunicator Al am Code/Channel* Assigned to Zone 6’: D 7. Cmmunicator Alarm Code/Channel* Assigned to Duress Alara: cl 8-12. Iat used.

PHCM Data Group 6 To program, set Rotary Switch to Position switches for checked boxes. 8 ("Secondary # Only") and raise Commu

PRO!4 Data Group g To program, set Rotary Witch to Position 11 (“b&t Used") and raise switches for checked boxes.. Permit Force

PROM Data Group 12 To program, set Rotary Switch to Position 14 ("Fbt Used") and raise switches for checked boxes. Delay Ex

B, Comunication PROn PRCM Data Group 1 To program, set Phone No. Selector Switch to "Primary" and Rotary Switch to Position

PROM Data Group 7 To program, set Rotary Switch to Position 4 ("Not Used") and raise switches for checked boxes representin