ADEMCO LYNX User's Guide download pdf (Page 25)

– 25 –

SECURING THE PREMISES

SECURING THE PREMISESSECURING THE PREMISES

SECURING THE PREMISES

Entry/Exit Delays

Entry/Exit DelaysEntry/Exit Delays

Entry/Exit Delays

Entry Delay

Entry Delays give you time to disarm the system when you re-enter through the designated entrance door. You

must disarm the system before the entry delay period ends, or an alarm will occur. The control beeps during the

entry delay period, reminding you to disarm the system. There are two entry delays (if programmed). The first

is for your primary entrance and the second can be used for a secondary entrance, where a longer delay is

required to walk to the control to disarm the system. You can also arm the system with no entry delay at all by

selecting the “Delay” icon prior to arming the system. This will toggle the system to “Instant”, which can

provide greater security while on the premises or while away for extended periods of time. See Arming the

System section for procedure. See your installer for delay times programmed for your system.

Exit Delay: 45, 60, 90 seconds, 2 minutes

Entry Delay 1: None, 15, 30, 45, 60, 90 seconds, 2, 3, 4 minutes

Entry Delay 2: None, 15, 30, 45, 60, 90 seconds, 2, 3, 4 minutes

LYNX Touch (L7000CN) Canada Exit/Entry Delay Times

Exit Delay: None, 15, 30, 45, 60, 90 seconds, 2 minutes

Entry Delay 1: None, 15, 30, 45, 60, 90 seconds, 2 minutes

Entry Delay 2: None, 15, 30, 45, 60, 90 seconds, 2 minutes

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 79 80

No comments

ADEMCO LYNX User's Guide Page 25