ADEMCO VISTA 10 User's Guide download pdf (Page 45)

– 45 –

Quick Guide to Basic System Functions

FUNCTION PROCEDURE COMMENTS

Check Zones

Press READY key. View faulted zones when system not

ready.

Arm System

Enter code. Press arming key desired:

(AWAY, STAY, NIGHT-STAY,

MAXIMUM, INSTANT)

Arms system in mode selected.

Quick Arm

(if programmed)

Press #. Press arming key desired:

(AWAY, STAY, MAXIMUM, INSTANT)

Arms system in mode selected, quickly

and without use of a code.

Bypass Zone(s)

Enter code. Press BYPASS key.

Enter zone number(s) to be bypassed

(use 2-digit entries).

Bypassed zones are unprotected and

will not cause an alarm if violated.

Quick Bypass

(if programmed)

Enter code. Press BYPASS key + [#]. Bypasses all faulted zones

automatically.

Silence Sounders

Burglary:

Fire:

"Check":

Enter code. Press OFF key.

Press OFF key.

Press any key.

Also disarms system. Memory of alarm

remains until cleared.

Memory of Alarm remains until cleared.

Determine cause.

Disarm System

Enter code. Press OFF key. Also silences sounders. Memory of

alarm remains until cleared.

Clear Alarm

Memory

After disarming, enter code again.

Press OFF key again.

Keypad beeps rapidly on entry if alarm

has occurred while absent. Alarm

display will remain upon disarming

until cleared.

Duress (if active

and connected to

Central Station)

Arm or disarm "normally", but

use your 4-digit Duress code to do so.

Performs desired action and sends

silent alarm to Central Station.

Panic Alarms

(as programmed)

Press key [A], [B], or [C] for at least 2

seconds or press designated key pairs.

See the Panic Keys section for

emergency functions programmed for

your system. Note: Keys “A”, “B”, and

“C” may have been programmed for

other functions.

Chime Mode

To turn ON or OFF: Enter code. Press

CHIME key.

The keypad will sound if doors or

windows are violated while system is

disarmed and chime mode is ON.

Test Mode

To turn ON: Enter code. Press TEST key.

To turn OFF: Enter code. Press OFF key.

Tests alarm sounder and allows sensors

to be tested.

Phone Access

if applicable

Consult Phone Access User's Guide that

accompanies the Phone Module.

Permits system access remotely, via

Touch-tone phone.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 55 56

Comments to this Manuals

No comments

ADEMCO VISTA 10 User's Guide Page 45

Comments to this Manuals

Related products and manuals for Security access control systems ADEMCO VISTA 10