ADEMCO VISTA-100 User Manual download pdf (Page 2)

Test Sensors 4-Digit Code + 5 (TEST) + 0

Keypad will beep every 40 seconds

Open sensors and keypad will sound

End test with 4-digit Code + 1 (OFF) key

(Wireless motions require no movement for 4 minutes prior to testing)

View Time/Date (Alpha Keypads only)

Master Code + # + 63

(Stays on for 30 seconds)

Set Time/Date (Alpha keypads will display menu, standard keypad will show nothing)

(WARNING: Do not set clock for 01/01/03 to 08/31/01 or panel cannot be downloaded!)

1. User Code + # + 63

2. Press * within 30 seconds

3. Enter 2-digit Hour (00 to 12)

4. Enter 2-digit Minute (00 to 59)

5. Press 1 for PM, press 2 for AM

6. Enter last 2 digits of Year (01 to ??)

7. Enter 2-digit Month

8. Enter 2-digit Day

9. Press * to exit or wait 10 seconds (Keypad will not give any confirmation beep)

Event Buffer (Alpha Keypads only)

1. Enter Master Code + # + 6 + 0

(Display shows last Alarm or event)

2. Press * for previous event or # for next

3. Press any key other than * or # to exit

Note: Display shows Contact ID event, click "Format" button for details

U = User

P = Partition (if available)

and time/date it occured

Make Macros (if Installer enabled, a Function key can be set to allow multiple functions with 1 button)

(Alpha Keypad) 1. While system is disarmed enter Master Code + # + 6 + 6

2. Select which Macro to program 1 or 2

3. This is current Macro programming (none), to program press *

4. Lets program system to bypass zones 02 and 03 and Arm Away

5. Press 6 (Bypass key) then 02 (Zone 02) and 03 (Zone 03)

6. Press D (bottom Function key) to save the command

7. Press 2 (Away key)

8. Press D (bottom Function key) to save the command

9. To exit press D (bottom Function key) for 2 seconds

Other possible commands that can be used

3 = Stay Arm

4 = Max Arm

7 = Instant Arm

1 2 3 4 5 6

No comments

ADEMCO VISTA-100 User Manual Page 2