ADEMCO AMC21 Operations Instructions download pdf (Page 12)

AMC21

21-Inch Color Monitor

Required Installation Tools

Installing the AMC21 monitor does not require any special tools.

Installation Instructions

WARNING: The monitor should be installed in an area that is

clean, dry and well ventilated. Do NOT install the monitor where it

can get wet; such as near pools, sinks, open windows, etc. Do NOT

install the monitor in excessively dusty areas; dust can block

ventilation holes causing the monitor to overheat. Operate the

monitor on flat firm surfaces; NOT on surfaces such as rugs,

carpet, beds or sofas because these can block ventilation holes on

the bottom of the monitor. Do NOT install the monitor where items

such as drapes or curtains can block ventilation holes. If the

monitor is installed in a rack, make certain it has sufficient

ventilation.

WARNING: If the monitor’s plug does not fit your power outlet, do

NOT modify the plug. Have a certified electrician update your

power outlet. Do NOT route the power cord where individuals can

trip on it. Do NOT route the power cord where it can be damaged

such as under a rug.

Place the monitor on a flat sturdy surface near a power outlet. Connect the

video input cable to the Video A In connector. The video input can be from

a camera, VCR, multiplexer or the loop output of another monitor. A

second video source can be connected the Video B In.

If your video source has an audio output, connect the audio from source “A”

to Audio A In and audio from source “B” to Audio B In.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

ADEMCO AMC21 Operations Instructions Page 12