1*71
1*72
1’73
1’74
1 “75
3rd Page Programming Fields
(press *94) PARTITIONING SETUP FIELDS
Refer to the PARTITION-SPECIFIC program fields for
programming each partition’s variable characteristics.
12/24 HOUR TIME STAMP FORMAT
•1
[0=12 hour]; 1=24 hour
EVENT LOG PRINTER ON-LINE
c1
[O=dlaable~ l=enable
PRINTER BAUD RATE I-*, [0=1200]
•1
REL4Y TIMEOUT XX MINUTES
m
Enter the relay timeout, 0-127 in multiples of 2 minutes, desirad for
#80 Menu Mode time driven event relay command numbers “04/09’
and #93 Menu Mode Relay programming output command “56”.
RELAY TIMEOUT YY SECONDS m
1 1
Enter the relay timeout, 0-127 seconds, desired for #60 Menu Mode
time driven event relay command numbers “0S/10” and #93 Menu
Mode Relay Programming command “57’.
1,* ~q:.:Ac~Ess,cQ,~<og .@2~:gmlqJg.& ~~:i?’””: :; ‘.2 f
,..,..:.%.. >.>.,.#
2
● 00 NUMBER OF PARTITIONS
•1
Enter 1-6 [1]
2*O1 DAYLIGHT SAVINGS TIME
mm
START/END MONTH
Start End
00-12:
if no daylight savings time, enter 00,00 default=04,10]
2*O2
DAYLIGHT SAVINGS TIME
r-i-l
START/END WEEKEND #
Start I End .
Enter 1-7.1 =first 2=aecoti 3=third 4=foutity 5=las~ 6.next to I@
7=3rd from last [1 ,5; 1s[ Sunday in April, last in Ott]
2*11
ALLOW DISARM OUTSIDE WINDOW
II
—
IF ALARM OCCURS
Used only if field 210 (partition-specific field) is set to”1”. If WISfield is
enabled (Y”) UIe system can be disarmed outskde the disarm window
if an alarm has occurred. If ‘V, d~rming can oniy be done during the
disarm window. If field 2“10 is sat to “O’ for a partition, th~ field has no
effect for that partition.
SCHEDULING REIATED DIALER REPORTS
2*13
2’14
1st Digit
L!.-.J
ml
ml
El
ml
El
ml
‘ml
2nd Diait
m
m
ccl
ccl
ml
ml
ml
ml
2*17
NUMBER OF CODES PER PARTITION
Enter 01-99. Total must be leas than or equal to 128
1 ~1 [Oefauit=99 in part. 1; 01 in all other Pattflons]
Early opening report code
Early closing report code
Late opening report code”
Late closing report code
No opening (late to open) report code
No closing (late
to close) report code
Auto-arm failure
report code
Access schedule changed report code
Page 4
L J
8(77
2 ‘ 19 USE PARTITION DESCRIPTORS
•1
[O=disable];I=enable
2=21 ENABLE SUPERVISION PULSES FOR LRR
TRIGGER OUTPUTS
/-1
Used for supervised connection to 7920 SE.
FB
Enter O to disable or 1 to enable the listed outputs.
F= Fire: B= Burglary S= Silent pamdduress
-
s
(44 pages)
(173 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals