ADEMCO VISTA-100 User Manual download pdf (Page 5)

Ademco Vista-20P/First Alert FA-168C User Codes

System Master Code User 02

Partition 1 Master Code User 03 (Partitioning can be changed)

Partition 2 Master Code User 33 (Partitioning can be changed)

Secondary Codes Partition 1 User 03 to 32 (Partitioning can be changed)

Secondary Codes Partition 2 User 33 to 49 (Partitioning can be changed)

Babysitter/Guest Code Any User Code

Hostage Code Any User Code

Do Not pause more than 2 seconds while entering commands or it will work

Program Master Installer Code + 8 + 02 + New Master Code

Change Master Master Code + 8 + 02 + New Master Code twice (Keypad should beep)

Add Code Master Code + 8 + User Number + New User Code (Keypad should beep)

Erase Code Master Code + 8 + User Number + # + 0 (Keypad should beep)

Authority Level 1. Master Code + 8 + User User Number + # + 1

(Optional) 2. Enter Authority Level for User

0 = Standard User (Default)

1 = Arm Only

2 = Babysitter/Guest Code (Disarms only if Armed by Guest Code)

3 = Duress Code

4 = Partition Master Code

3. Keypad should beep and exit

Partition Assign 1. System Master Code + 8 + User Number + # + 3 + 0

(Optional) 2. Enter Partition to assign this User Number (Multi Partitions can be assign)ed

1 = Partition 1 and Common Partition

2 = Partition 2 and Common Partition

3 = Common Partition Only

OR a combination of 1, 2 and 3

3. Press # to save and exit

Example: Change User 33 to Partition 1 and Partition 2

System Master Code + 8 + 33 + # + 3 + 0 + 1 + 2 + #

Pager Enable Master Code + 8 + User (02 to 49) + # + 5 + 1 (Turns ON paging for User)

Pager Disable Master Code + 8 + User (02 to 49) + # + 5 + 0 (Turns OFF paging for User)

User Group Master Code + 8 + User (02 to 33) + # + 2 + Group (1 to 8)

(For use with scheduling (see Basic Commands)

1 2 3 4 5 6

No comments

ADEMCO VISTA-100 User Manual Page 5