ADEMCO VISTA-250FBP User's Guide download pdf (Page 19)

– 19 –

Security Codes and Authority Levels (cont’d)

To Add a User

IMPORTANT: Temporary users should not be shown how to use any system

function they do not need to know (e.g. bypassing protection zones).

CODE

1. Enter Master or Manager code and press the 8

key.

2. Enter the new user's 3-digit User Number (002-250).

3. Enter 4-digit security code for that user. The following prompts will

appear.

ADD NEW USER?

0 = NO , 1 = YES

Enter 1 to add a new user code. Entering 0 will

change the existing user's code to the code entered

in step 3. See Changing A User's Code section.

USER NUMBER = 003

ENTER AUTH. LEVEL

Enter the authority level, 1-6, for this user within

this partition.

1=master 2=manager 3=operator A

4=operator B 5=operator C 6=duress code

GROUP BYPASSING?

0 = NO , 1 = YES

Enter 1 (YES) to allow this user to perform group

bypasses. Enter 0 (NO) this user will not be able to

perform group bypasses.

ACCESS GROUP?

ENTER 0-8

If access schedules have been programmed, this

prompt appears. Enter the user's access group

number (1-8) if this user should have limited

access to the system. Enter 0 if no access group

should be assigned.

RF BUTTON ?

0 = NO , 1 = YES

Not Used.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 79 80

No comments

ADEMCO VISTA-250FBP User's Guide Page 19