ADEMCO VISTA-250FBP User's Guide download pdf (Page 6)

– 6 –

System Overview (cont’d)

Zones

Your system's sensing devices have been assigned to various "zones." For

example, the sensing device on your Entry/Exit door may have been assigned

to zone 001, sensing devices on windows in the master bedroom to zone 002,

and so on. These numbers will appear on the display, along with an alpha

descriptor for that zone (if programmed), when an alarm or trouble condition

occurs.

Fire Protection

The fire protection portion of your security system (if used) is always on and

will sound an alarm if a fire condition is detected. Refer to the Fire Alarm

System section for important information concerning fire protection, smoke

detectors and planning emergency exit routes from your facility.

Burglary Protection

The burglary protection portion of your system must be turned on or "armed" before it

will sense burglary alarm conditions. Your system provides four modes of burglary

protection: STAY, AWAY, INSTANT and MAXIMUM, and even allows you to

BYPASS selected zones of protection while leaving the rest of the system armed. The

system also provides a CHIME mode, for alerting users to the opening and closing of

doors and windows while the system is disarmed. Refer to the other sections of this

manual for procedures for using these features.

The following table lists the four different arming modes and the results of each.

Features For Each Arming Mode

Arming Mode

Exit Delay Entry Delay Perimeter Armed

AWAY Yes Yes Yes

STAY✳ Yes Yes Yes

INSTANT✳ Yes No Yes

MAXIMUM Yes No Yes

✳The system provides three different STAY and INSTANT arming modes. See

ARMING IN THE STAY MODES and ARMING IN THE INSTANT MODES

sections for details on these modes.

1 2 3 4 5 6 7 8 9 10 11 ... 79 80

No comments

ADEMCO VISTA-250FBP User's Guide Page 6