ADEMCO Vista-128FB User Manual download pdf (Page 3)

–

Table Of Contents

RECOMMENDED PROGRAMMING PROCEDURE ................................................................................................. 4

PROGRAM FIELD CATEGORIES .............................................................................................................................6

VISTA-128FB PROGRAMMING FORM.....................................................................................................................7

PARTITION-SPECIFIC PROGRAMMING FORM....................................................................................................13

PROGRAMMING WITH #93 MENU MODE............................................................................................................. 15

5800 SERIES RF TRANSMITTER LOOP DESIGNATIONS....................................................................................20

ALPHA DESCRIPTOR VOCABULARY....................................................................................................................32

RELAY VOICE DESCRIPTORS AND CUSTOM WORD SUBSTITUTES VOCABULARY .....................................43

SYSTEM LAYOUT WORKSHEETS.........................................................................................................................45

OUTPUT RELAYS WORKSHEETS.........................................................................................................................57

SCHEDULING MENU PROMPTS............................................................................................................................60

SCHEDULING WORKSHEETS ...............................................................................................................................61

VISTA-128FB SUMMARY OF CONNECTIONS ......................................................................................................67

The purpose of this document is to provide a quick and easy way to program your entire system. A recommended

programming procedure is included, followed by a list of program fields with the corresponding program group they

belong to (system-wide, partition-specific, scheduling, etc.). Two program forms are included, one contains all the

programming fields, and the other contains the partition-specific fields. If you are setting up a single-partition

system, the partition-specific fields become system-wide fields.

Following the program forms are system layout worksheets. We recommend that you use these sheets to plan

your system before programming is performed. If you need further information about specific programming

options, see the VISTA-128FB INSTALLATION INSTRUCTIONS.

• Make sure that one two-line alpha keypad is connected to the control and is set to device address "00."

Single Partition System

• The system default is for a single partition system. Use the VISTA-128FB SINGLE PARTITION

PROGRAMMING FORM when programming for single partition usage. Follow the steps outlined in

RECOMMENDED PROGRAMMING PROCEDURE of this document for proper programming procedure.

Multiple-Partition System

• You must enter the number of partitions you are using in data field 2*00 to set the system for multiple

partitions. Use the VISTA-128FB SINGLE PARTITION and the PARTITION-SPECIFIC PROGRAM

FORMS when programming the system for multiple partitions. Follow the steps outlined in

RECOMMENDED PROGRAMMING PROCEDURE of this document for proper programming procedure.

SUMMARY OF PROGRAMMING COMMANDS

• To enter program mode,

enter installer code + [8] + [0] + [0] + [0]

• To set standard defaults,

press *97

• To set communication defaults,

press *94 + one of the following: *80=low speed; *81=Ademco Express;

*82=Ademco High Speed; *83=Ademco's Contact ID

• To change to next page of program fields,

press *94

• To return to previous set of fields,

press *99

• To erase account & phone number field entries,

press [*] + field number + [*]

• To assign zone descriptors,

press #93 + follow menu prompts

• To add custom words,

press #93 + follow menu prompts

• To enter Installer's Message,

press #93 + follow menu prompts

• To exit program mode,

press *99 OR *98:

*99 allows re-access to programming mode by installer code. *98

prevents re-access to programming mode by installer code.

Standard default (*97) values are shown in brackets [ ], otherwise default = 0.

1 2 3 4 5 6 7 8 ... 67 68

Comments to this Manuals

No comments

ADEMCO Vista-128FB User Manual Page 3

Comments to this Manuals

Related products and manuals for Security access control systems ADEMCO Vista-128FB