ADEMCO 6270 Setup Guide download pdf (Page 21)

SECTION 5: Setup

5–3

Display & Audio Setup

Operating Modes

Operating modes allow you to turn the TouchCenter chime mode on or

off. Additionally, you may also turn the voice mode on or off. The

operating modes provide the following features:

• Chime Mode – When selected, a request is sent to the alarm panel

requesting that the panel chime the TouchCenter whenever a change

in zone status occurs.

• Voice Mode – When selected, a request is sent to the alarm panel

requesting that the panel initiate TouchCenter voice annunciation

whenever a change in system status occurs such as Armed,

Disarmed, or Alarms.

• Voice Chime – The chime mode and voice mode are in effect. When

selected, you will get the chime beeps followed by voice annunciation.

Access the "Display and Audio Setup" screen as follows:

1. From the "Home" screen, press the Setup button.

SCREEN ACTION

1. The "Setup" screen is displayed.

2. Press the Disp&Audio Setup button.

If enabled, the "User Authorization"

screen is displayed with the instructions

"Enter Authorized Code"

3. Enter your “Authorized Code". The

"Display and Audio Setup" screen is

displayed.

4. Touch the Chime Mode button to turn

the Chime Mode on or off. A checkmark

appears in the button when the Chime

Mode is “ON”. Note that it may take a few

seconds for the Chime Mode to take

effect.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 63 64

No comments

ADEMCO 6270 Setup Guide Page 21