ADEMCO VISTA-128B User's Guide Page 50
- Page / 80
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
– 50 –
Using #70 Relay Menu Mode
General Information
Your system may be set up so that certain lights or other devices can be
turned on or off by using the #70 command from either a keypad or a
telephone keypad (if 4286 VIP module is used). Ask your installer if this has
been done in your system.
To activate relays from a keypad, enter 4-digit security code + [#] +70.
Follow the keypad prompts described below.
To activate relays using a telephone and 4286 VIP module, first dial
the 2-digit phone access code. When the system acknowledges the access,
enter 4-digit security code + [#] + 70. The following prompts/voice responses
will begin.
ENTER DEVICE NO.
00=QUIT 01
Voice: "ENTER DEVICE CODE NOW"
Enter the 2-digit number of the device to be
activated.
Note that if an invalid number is entered, the
system will simply ask you to reenter the number.
NN DEVICE IS OFF
HIT 0=OFF , 1=ON
Voice: "voice descriptor DEVICE nn ON/OFF. FOR
voice descriptor ON ENTER 1, FOR voice descriptor
OFF ENTER 0"
Press 0 or 1 to turn the device off or on respectively.
"nn" represents the 2-digit device number and voice
descriptor is the relay voice descriptor programmed
by the installer.
NN DEVICE IS OFF
HIT THE "✴" KEY
Voice: "voice descriptor DEVICE nn ON/OFF. TO
EXIT ENTER 00 NOW"
From a keypad, press ✴ to continue. The ENTER
DEVICE NO. prompt will appear.
From a telephone keypad, enter 00 to exit, or
enter the next relay number to be programmed. The
current on/off state of that relay will be
annunciated as described above. Alternatively, if 6
seconds elapses with no key depression, the 4286
VIP module will annunciate the "ENTER DEVICE
CODE NOW" message.
- TABLE OF CONTENTS 3
- System Overview 5
- System Overview (cont’d) 6
- About The Keypads 10
- Functions of the Keypad 11
- Entry/Exit Delays 14
- General Information 15
- Duress Code 15
- Quick Arming 15
- Authority Levels 16
- To Exit User Edit Mode 17
- To Add a User 18
- To Change a User's Code 20
- To Delete a User 21
- Accessing Other Partitions 22
- Master Keypad Operation 23
- Common Lobby Operation 25
- Accessing Other Panels 27
- Multi-Panel View Mode 29
- Checking For Open Zones 31
- Using the ✳ 32
- ✳ READY Key 32
- Bypassing Protection Zones 33
- Viewing Bypassed Zones 34
- Group Bypass 34
- Typical bypass message 35
- Arming Perimeter Only 36
- Arming All Protection 39
- Quick Exit 41
- Using the 1 OFF Key 42
- Memory of Alarm 42
- Using the Keyswitch 43
- Chime Mode 44
- Panic Keys 46
- Speed Key (Macros) 47
- Speed Key (Macros) (cont’d) 48
- Access Door Control 49
- Using #70 Relay Menu Mode 50
- Using Schedules 51
- Using Schedules (cont’d) 52
- Programming Device Timers 54
- Event Log Procedures 60
- Setting the Time and Date 61
- Testing the System 62
- Fire Alarm System 63
- Trouble Conditions 64
- Trouble Conditions (cont’d) 65
- Emergency Evacuation 68
- Maintaining Your System 69
- Routine Care 70
- (Alpha Display Keypads) 73
- WARNING! 77
- ÊK5895V5*Š 80
Related products and manuals for Security access control systems ADEMCO VISTA-128B
(132 pages)
(61 pages)
(132 pages)InSinkErator SS-50 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Ekwipunek InSinkErator SS-50.
Dostarczamy 1 pdf podręczników InSinkErator SS-50 do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Comments to this Manuals