ADEMCO Vista User Manual Page 34

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 33
–34–
SUMMARY OF AUDIBLE/VISUAL NOTIFICATIONS
(ALPHA DISPLAY KEYPADS)
SOUND CAUSE DISPLAY
LOUD, INTERRUPTED*
Keypad & External Sounder
FIRE ALARM
FIRE is displayed; descriptor of zone in alarm is displayed.
LOUD, CONTINUOUS*
Keypad &External Sounder
BURGLARY/AUDIBLE
EMERGENCY ALARM
ALARM is displayed; descriptor of zone in alarm is also displayed..
Also see "Exit Alarm Warning Displays and Sounds" on page 21.
ONE SHORT BEEP
(not repeated)
Keypad only
a. SYSTEM DISARM
b. SYSTEM ARMING ATTEMPT
WITH AN OPEN ZONE
c. BYPASS VERIFY
a. DISARMED/READY TO ARM is displayed. Green READY indicator (if present) is lit.
b. The number and descriptor of the open protection zone is displayed.
Green READY indicator (if present) is not lit.
c. Numbers and descriptors of the bypassed protection zones are displayed (One beep is
heard for each zone displayed). Subsequently, the following is displayed:
DISARMED BYPASS Ready to Arm
ONE SHORT BEEP every
40 sec. Keypad only
SYSTEM IS IN TEST MODE Opened Zone identifications will appear.
ONE BEEP every 40 sec.
Keypad only
a. LOW BATTERY AT A XMTR
b. SYSTEM MAIN BATT. WEAK
c. TROUBLE
a. LO BAT displayed with description of transmitter.
b. LO BAT displayed with no transmitter description.
c. CHECK displayed. Descriptor of troubled protection zone is displayed.
TWO SHORT BEEPS
Keypad only
ARM AWAY OR MAXIMUM ARMED AWAY or ARMED MAXIMUM is displayed. Red ARMED indicator is lit.
THREE SHORT BEEPS
Keypad only
a. ARM STAY OR INSTANT
b. ZONE OPENED WHILE SYS-
TEM IS IN CHIME MODE
c. ZONE OPENED WHILE SYS-
TEM IS IN TEST MODE
a. ARMED STAY or ARMED INSTANT is displayed. Red ARMED indicator is lit.
b. CHIME displayed. Pressing / READY key will display descriptor of opened zone.
c. Open protection zone descriptor is displayed.
RAPID BEEPING
Keypad only
MEMORY OF ALARM FIRE or ALARM is displayed; descriptor of zone in alarm is displayed.
SLOW BEEPING
Keypad only
a. ENTRY DELAY WARNING
b. EXIT DELAY ALERT
(if programmed)
a. DISARM SYSTEM OR ALARM WILL OCCUR is displayed. Exceeding the delay time
without disarming causes alarm.
b. ARMED AWAY or ARMED MAXIMUM is displayed. Slow beeps change to fast beeps
during last 5 seconds of exit delay.
*If bell is used as external sounder, fire alarm is pulsed ring (see page 29); burglary/audible emergency is a steady ring.
Note:
Also see
Other Trouble Displays
and
Total Power Failure
under
TROUBLE CONDITIONS
on pages 27 and 28.
Page view 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

Comments to this Manuals

No comments