ADEMCO Vista User Manual download pdf (Page 12)

–12–

ENTRY/EXIT DELAYS

General Information Your system has preset time delays, known as exit delay and entry delay. When you arm

your system, exit delay gives you time to leave through the entry/exit door without

setting off an alarm. Entry delay gives you time to disarm the system when you re-enter

through the entry/exit door. The system must be disarmed, however, before the entry

delay period ends, or an alarm will occur. The keypad will beep slowly during the entry de-

lay period, reminding you to disarm the system.

You can also arm the system with no entry delay at all by using either INSTANT or

MAXIMUM arming modes. These modes can provide greater security while you are

sleeping or while you are away for extended periods of time.

See your installer for your delay times and record them here:

Exit Delay: seconds Entry Delay: seconds

Remember, there will be no entry delay

when arming INSTANT or MAXIMUM.

Exit Delay

Alerting Sound

When arming AWAY (see page 18) or MAXIMUM (see page 19), slow beeps will sound

from the keypad(s) during the exit delay, turning to fast beeps during the final five

seconds of the exit delay time.

Ask your installer if this feature is active for your system, and if so, check here:

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

No comments

ADEMCO Vista User Manual Page 12