ADEMCO VISTA 10 User's Guide download pdf (Page 18)

– 18 –

ARMING PERIMETER ONLY

With Entry Delay OFF

Using the 7 INSTANT Key

BEFORE ARMING, make sure all non-main doors and windows are closed.

Refer to CHECKING FOR OPEN ZONES on page 14.

Use this key when you are staying inside and you do not expect anyone to use

an entry/exit door.

1. Enter your security code and press the INSTANT key.

2. The keypad will beep three times and display the armed message. The red

ARMED indicator will light. Note that there is an exit delay in effect

before arming actually takes place. See the note below.

After arming, an alarm will sound immediately if any protected

perimeter door or window is opened, but you may otherwise move freely

throughout the premises.

An alarm will sound immediately if anyone opens an entry/exit door.

If you wish to open the entry/exit door to let someone in after arming

INSTANT, you can restart the exit delay at any time – simply press the [

✴

]

key, and then let that person in. This will avoid having to disarm the system

and then re-arm it again.

Note: When you first arm the system in the INSTANT mode, “YOU MAY

EXIT NOW” will be displayed on an alpha keypad during the

programmed exit delay. This delay is in effect in the system even when

arming INSTANT. When the exit delay period ends, “YOU MAY EXIT

NOW” disappears and the system is then fully armed in the INSTANT

mode.

THE

INSTANT MODE

ARMS THE PERIMETER (INCLUDING THE ENTRY/ EXIT

DOOR), WITH

NO ENTRY DELAY. PERSONS WITHIN THE PREMISES CAN MOVE

ABOUT FREELY.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

No comments

ADEMCO VISTA 10 User's Guide Page 18