ADEMCO VISTA 10 User's Guide download pdf (Page 22)

– 22 –

DISARMING THE SYSTEM AND SILENCING

ALARMS

Using the 1

OFF Key

The OFF key is used to disarm the system and to silence alarm and trouble

sounds.

To Disarm the System:

Enter your security code and press the OFF key.

The "READY" message will be displayed, and the keypad will emit a single

tone to confirm that the system is disarmed.

To Silence a Burglary Alarm:

IMPORTANT: If you return and the main burglary sounder is on,

DO NOT

ENTER, but CONTACT THE POLICE from a nearby safe location.

If you return after an alarm has occurred and the main sounder has shut

itself off,

the keypad will beep rapidly upon your entering, indicating that an

alarm has occurred during your absence.

Enter your security code and press the OFF key to silence the alarm (or

warning tones of a Memory of Alarm).

Note the zone in alarm on the keypad display, and make that zone intact

(close door, window, etc.). Now enter the security code plus OFF sequence

again to clear the keypad's Memory of Alarm display. If the display will not

clear and does not provide a "READY" message, notify the alarm agency.

To Silence a Fire Alarm:

Simply press the OFF key (the security code is not needed to silence FIRE

alarms).

To then clear the keypad's Memory of Alarm display, enter your security code

and press the OFF key again. See page 32 for additional fire alarm

information.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

No comments

ADEMCO VISTA 10 User's Guide Page 22