ADEMCO VISTA 10 User's Guide download pdf (Page 33)

– 33 –

FIRE ALARM SYSTEM (cont)

If Installed

Manually Initiating a Fire Alarm

1. Should you become aware of a fire emergency before your detectors sense

the problem, go to your nearest keypad and manually initiate an alarm by

pressing the appropriate panic key(s), assigned for fire emergency (if

programmed by the installer).

2. Evacuate all occupants from the premises.

3. If flames and/or smoke are present, leave the premises and notify your

local Fire Department immediately.

4. If no flames or smoke are apparent, investigate the cause of the alarm.

The zone number(s) of the zone(s) in an alarm condition will be displayed

at the keypad.

Ask your installer which lettered key, or key pair, has been assigned for

manually initiating a fire alarm, and place a check mark in the box next to

the assigned key or key pair.

CHECK LETTERED KEY

ASSIGNED FOR FIRE

CHECK KEY PAIR ASSIGNED FOR FIRE

PRESS 1 and

✴

AT SAME TIME

PRESS

✴

and

AT SAME TIME

PRESS

and

AT SAME TIME

Press and hold the lettered key assigned for fire emergency for 2

seconds. If the keypad does not have individual lettered keys, press the

key pair assigned for fire emergency.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39 40

No comments

ADEMCO VISTA 10 User's Guide Page 33