ADEMCO VISTA 10 User's Guide download pdf (Page 20)

– 20 –

ARMING ALL PROTECTION

With Entry Delay ON

Using the 2 AWAY Key

BEFORE ARMING, make sure all non-main doors and windows are closed.

Refer to CHECKING FOR OPEN ZONES on page 14.

Use this key when no one will be staying inside.

1. Enter your security code and press the AWAY key.

2. The keypad will beep twice and display the armed message. The red

ARMED indicator will light.

3. You may leave through an entry/exit door during the exit delay period

without causing an alarm.

After the exit delay expires, the system arms and will sound an alarm

immediately if a protected window or non-entry/exit door is opened, or if any

movement is detected inside your premises.

You may re-enter through an entry/exit door, but must disarm the

system within the entry delay period to avoid an alarm.

THE AWAY KEY ARMS THE ENTIRE SYSTEM (INTERIOR AND

PERIMETER), BUT ALLOWS USE OF THE ENTRY/EXIT DOOR.

TYPICAL DISPLAYS - "ARMED AWAY"

AWAY

✴✴✴ ✴✴✴



FIXED WORD ALPHA

The message “YOU MAY EXIT NOW” changes to "ALL SECURE" when the

exit delay expires.

NOTE:

Failure to close an open exit route zone before the exit delay time ends

may result in that zone being automatically bypassed at that time.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

No comments

ADEMCO VISTA 10 User's Guide Page 20