ADEMCO VISTA 10 User's Guide download pdf (Page 29)

– 29 –

TROUBLE CONDITIONS

"CHECK" and "BATTERY" Displays

The word “CHECK” on the keypad's display, accompanied by a beeping at

the keypad, indicates a trouble condition in the system.

To silence the beeping for these conditions, press any key.

A display of "CHECK" and one or more zone

numbers indicates that a problem exists with the displayed zone(s) and

requires your attention. If the “CHECK” display relates to a fire

zone, CALL FOR SERVICE IMMEDIATELY.

Determine if the zone(s) displayed are intact and make them so if they

are not. If the problem has been corrected, the display can be cleared if

you enter the OFF sequence (security code plus OFF key) twice. If the

display persists, CALL FOR SERVICE.

2. If there are wireless sensors* in your system, the “Check” condition

may also be caused by some change in the environment that prevents the

receiver from hearing a particular sensor. CALL FOR SERVICE if this

occurs.

TYPICAL "CHECK" DISPLAYS



CHECK



FIXED-WORD ALPHA

IF YOU CANNOT CORRECT A "CHECK" DISPLAY, OR IF IT IS FOR

A FIRE ZONE, CALL FOR SERVICE IMMEDIATELY.

* Not all systems use wireless sensors.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 39 40

No comments

ADEMCO VISTA 10 User's Guide Page 29