ADEMCO Symphony 8142 Setup Guide download pdf (Page 50)

Installation and Setup Guide

4-14

FIELD

TITLE and DATA ENTRIES EXPLANATION

*161

Pager 1 Characters

Enter up to 16 characters

Up to 16 optional characters may be sent as a prefix

to the 7-digit system status code sent to pager #1 (if

used). Phone number in field *160 must have been

entered. If fewer than 16 characters, exit by pressing

[∗] and next field number. To clear entries from this

field, press ∗161∗.

For example, use these optional 16 characters for the

following:

• PIN number (to identify a specific pager to the

paging company)

• Subscriber account number

• ∗ (enter # + 11 to send ∗); # (enter # + 12 to send #)

• Pause (enter # + 13 to allow a 2-second pause)*

• Any special character(s) the end user may decide

to transmit

* Some paging systems require pause(s) before the

prefix.

The format for the 7-digit system status code is

defined as follows:

Pager Format: XXX-YYYY where:

XXX = 3-digit event code: 911 = Alarm

811 = Trouble

101 = Opening

(disarm)

102 = Closing (arm)

YYYY = 4-digit user or zone number (depending

on type of event).

The first digit indicates partition,

followed by 0, then the 2-digit user or

zone number.

Example 1. Pager displays: 911–1004

This indicates that the system is reporting an alarm

(911) caused by a fault in zone 4 in partition 1.

Example 2. Pager displays: 102–2005

This indicates that the system is reporting a closing–

system arming (102) by User 5 in partition 2.

*162

Pager 1 Report Options

0 = No reports sent

1 = Open/close for all users enabled to page†

4 = All alarms and troubles

5 = All alarms, troubles, and open/close for all

users enabled to page

12 = Alarms and troubles for zones entered in

zone list 9

13 = Alarms and troubles for zones listed in

zone list 9 and opens/closes for all users

enabled to page

Enter the types of reports to be sent to pager 1 for

each partition.

† Reports to pager only when arming

(close)/disarming (open) from a keypad using a

security code; auto-arming/disarming, arming with

assigned RF button, and keyswitch arming do not

send pager messages.

*163

Pager 2 Phone No.

Enter up to 20 digits

If you enter fewer than 20 digits, exit by pressing [∗]

and next field number. To clear entries from this

field, press ∗163∗.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 111 112

Comments to this Manuals

No comments

ADEMCO Symphony 8142 Setup Guide Page 50

Comments to this Manuals

Related products and manuals for Numeric keypads ADEMCO Symphony 8142