ADEMCO Symphony 8142 Setup Guide download pdf (Page 55)

Data Field Programming

4-19

AUI Enable

FIELD

TITLE and DATA ENTRIES EXPLANATION

*189

AUI Device 1 and 2 Enable

(for Touch Screen Style Keypads)

0 = disabled

1 = partition 1

2 = partition 2

3 = common partition

NOTE: Use of AUI does not affect the number of

standard keypads supported.

The System supports up to two touch screen style

keypads (e.g., Symphony Advanced User Interface, an

6270 Touch Screen Keypad).

Enter each AUI’s home partition.

AUI Compatibility Note: To ensure proper AUI

device operation, use AUI devices with the

following rev levels: 6270 series use version 1.0.9

or higher; 8132/8142 (Symphony) series use

version 1.1.175 or higher.

Touch Screen (AUI) device 1: Must set AUI device

address to 1

Touch Screen (AUI) device 2: Must set AUI device

address to 2

Keypad Programming Fields

NOTE: Each keypad must be assigned a unique address. Keypads programmed with the same address will give

unpredictable results.

FIELD

TITLE and DATA ENTRIES EXPLANATION

*190

Keypad 2 Device Address 17

Entry 1 – Partition Assignment:

0 = keypad disabled 2 = partition 2

1 = partition 1 3 = common

Entry 2 – Sound Option:

0 = no suppression

1 = suppress arm/disarm and E/E beeps

2 = suppress chime beeps only

3 = suppress arm/disarm, E/E beeps and chime

beeps

Keypad 2

Entry 1: enter the partition in which the keypad is

located

Entry 2: Enter the desired sound option for this

keypad.

NOTE: Address 16 is reserved for keypad 1, which is

factory set to partition 1 with all sounds enabled.

*191

Keypad 3 Device Address 18

See field *190 for entries.

Keypad 3