ADEMCO Symphony 8142 Setup Guide download pdf (Page 81)

Testing the System

5-25

PROMPT

VALID ENTRIES EXPLANATION

START SMTWTFS

HH MMAM 0010000

Start Time

01-12 (00-23)

†

= hour

00-59 = minute

0 = AM; 1 = PM (if applicable)

Days = place “1” under days

[∗] to continue

Enter the event’s start time and days of the week

to occur.

To select days, position the cursor under the

desired days using the [∗] key to move forward,

then press “1” to select the day(s).

† use 00-23 if 24-hour time is enabled.

WARNING DLY TIME

Warning Delay Time

01-15 = arm warning delay time

in minutes

[∗] to continue

This prompt appears if events “4 or 5” were

selected.

Enter the desired amount of time the system

should warn of impending arming. The system

will beep once every 30 seconds to alert users

that arming will soon occur. Otherwise, this

prompt is skipped.

STOP SMTWTFS

HH MMAM 0010000

Stop Time

01-12 (00-23)

†

= hour

00-59 = minute

0 = AM; 1 = PM (if applicable)

Days = place “1” under days

[∗] to continue

Enter the event’s stop time and days of the week

to occur.

To select days, position the cursor under the

desired days using the [∗] key to move forward,

then press “1” to select the day(s).

This entry applies only to the following events:

1 (relay on/off)

2 (user access)

3 (child-not-home report)

† use 00-23 if 24-hour time is enabled.

REPEAT OPTION

0-4 X

Repeat Option

0 = do not repeat

1 = repeat schedule weekly

2 = repeat schedule biweekly

(every other week)

3 = repeat schedule every third

week

4 = repeat schedule every fourth

week

[∗] to continue

Enter the desired repeat option for this schedule.

e.g., To make a schedule that happens everyday

you would select all days with a repeat count of

1. To make a schedule that runs for one week

then stops, select everyday with a repeat count of

NOTE: Schedules run sequentially from Sunday

to Saturday and reset on Sunday at midnight. If

repeat count is 0, only those events scheduled

from the day the schedule is set to Sunday will

occur. Events scheduled after Sunday will be

ignored.

RANDOMIZE

0=NO 1=YES X

Randomize

0 = no

1 = yes

[∗] to continue

If selected, the scheduled start and stop times

will vary within 60 minutes of the “hour” time.

For example, if a schedule is set to start at

6:15pm, it will do so the first time 6:15pm

arrives, but on subsequent days it will start

anytime between 6:00 and 6:59 p.m.

NOTE: Do not use the random option if the start

and stop times are within the same “hour” setting,

otherwise unpredictable results may occur (e.g.,

the randomized stop time may occur before the

start time).

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 111 112

Comments to this Manuals

No comments

ADEMCO Symphony 8142 Setup Guide Page 81

Comments to this Manuals

Related products and manuals for Numeric keypads ADEMCO Symphony 8142