ADEMCO VISTA 10 Setup Guide download pdf (Page 9)

2-1

SECTION 2

Installing the Control & Peripherals

•••••••••••••••••••••••••••••••••••••••••••••••••

Cabinet and Lock Installation

For Residential Fire and/or Burglary installa-

tions, use the ADEMCO RES-UL cabinet.

For Commercial Burglary installations, use the

ADEMCO COM-UL cabinet.

Before installing the cabinet's contents,

remove the metal cabinet knockouts required

for wiring entry. Do not attempt to remove the

knockouts after the circuit board has been

installed.

1. Mount the control cabinet to a sturdy wall in a

clean, dry area that is not readily accessible to the

general public using fasteners or anchors (not

supplied), in the four cabinet mounting holes.

2. Remove cabinet door, then remove the lock knockout

from the door. Insert the key into the lock.

3. Position the lock in the hole, making certain that the

latch will make contact with the latch bracket when

the door is closed.

4. When correctly positioned, push the lock until it is

held securely by its snap tabs.

Notes:

•

Use an ADEMCO No. N4445 Lock.

•

The cabinet can be closed and secured without a lock

by using 2 screws in the cover's edge.

CABINET DOOR

BOTTOM

LOCKED

UNLOCKED

cab_lock_snap-001-V0

ADEMCO

PUSH

SNAP

TAB

SNAP

TAB

PUSH

ON LOCK

UNTIL IT

IS SEATED

SECURELY

STEP 2STEP 1

CHECK

POSITION

Figure 2-1. Installing the Cabinet Lock

Mounting the PC Board Alone

(no RF Receiver)

1. Hang two mounting clips (provided) on the raised cabinet tabs (see Detail B in Figure 2-2).

2. a. Insert the top of the circuit board into the slots at the top of the cabinet. Make sure that the board

rests on the correct row (see Detail A below).

b. Swing the base of the board into the mounting clips and secure the board to the cabinet with the accompanying

screws (see Detail B).

CIRCUIT

BOARD

DETAIL B

SIDE VIEW

OF MOUNTING

CLIPS

DETAIL A

SIDE VIEW

OF BOARD

SUPPORTING

SLOTS

CIRCUIT

BOARD

cb_mount-V0

CABINET

Figure 2-2. Mounting the PC Board

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 79 80

Comments to this Manuals

No comments

ADEMCO VISTA 10 Setup Guide Page 9

Comments to this Manuals

Related products and manuals for Security access control systems ADEMCO VISTA 10