ADEMCO Vista-128FB Setup Guide download pdf (Page 103)

Section 6 – Scheduling Options

6-11

Bypass

65=Access Point Group Lock

66=Access Point Group Exit

77=Access Point Group Enable

78=Access Point Group

Disable

ACTION CODES EXPLANATION ACTION SPECIFIER

67=Access Point Partition

Grant

68=Access Point Partition

Grant w/Override

69=Access Point Protect by

Partition

70=Access Point Bypass by

Partition

71=Access Point Lock by

Partition

72=Access Point Exit by

Partition

Actions 67-72

If you selected actions 67-72, the prompt at the right appears. Enter the partition

to which the action applies. Enter 0 to select all partitions. Enter a partition

number again to deselect it.

Press [✳] to accept entry. The “Time Window ?” prompt appears.

PART? 12345678

HIT 0-8 X X

73=Access Point Trigger On

74=Access Point Trigger Off

Actions 73-74

If actions 73-74 were selected, the prompt at the right will be displayed. Enter

the trigger number.

Press [✳] to accept entry. The “Time Window ?” prompt appears.

01 TRIGGER #

01 Time Window ?

00:00 00:00 01

Enter the time window number (01-20) for which this timed event is to occur. As the number is keyed in, the

actual time that has been stored for the time window number is displayed.

Press [✳] to accept entry.

01 Active time ?

Enter the activation time from 1-10 (listed below). As the number is keyed in, the activation time is displayed.

The choices are:

1: Trigger at the start of the window.

2: Trigger at the end of the window.

3: Take effect only for the duration of the window.

4: Trigger at both the start and the end of the window. Example: coffee break buzzer.

5: Random trigger, up to 30 minutes, after the start of the window.

6: Random trigger, up to 30 minutes, after the end of the window.

7: Take effect only for the duration of the window, but random start and end the window up to 30 minutes.

Press [✳] to accept entry.

Days ? MTWTFSSH

Hit 0-8 x x

The system then asks for which days the event is to be activated.

Press 0 to toggle all days on or off; or press keys 1-8 to toggle the letter “x” under the day on or off (Monday =

1, Holiday = H = 8).

When all entries have been made, the “TIMED EVENT #?” prompt is displayed again.

Repeat the procedure for each timed event for the installation.

Quit ?

1 = YES 0 = NO 0

Enter 0 at the “Quit ?” prompt to return to the main menu choices and continue programming. Enter 1 to quit

Scheduling Menu Mode.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 146 147

Comments to this Manuals

No comments

ADEMCO Vista-128FB Setup Guide Page 103

Comments to this Manuals

Related products and manuals for Security access control systems ADEMCO Vista-128FB