ADEMCO Vista-128FB Setup Guide download pdf (Page 108)

Section 6 – Scheduling Options

6-15

06 DAYS? MTWTFSS

HIT 0-7 x x

To select the days to be activated, enter 1-7 (Monday = 1). An “x” appears under that day, indicating the

output for that day is active. Entering a day’s number again deactivates that day. Pressing 0 toggles all days

on/off.

The outputs are in effect only for the days highlighted with the letter “x” under them. As the week progresses,

the selected days are reset to the inactive state, unless the permanent option is selected (next screen prompt).

When completed, press [✳] to continue.

06 Permanent ?

0 = NO,1 = YES 0

Selecting “Permanent” (1) means that this schedule will be in effect on a continuous basis. Selecting 0 means

that this schedule will be in effect for one week only. The letter “x” under the day is then cleared, but all other

entries for the output device remain programmed.

Press [✳] to accept entry.

The system quits User Scheduling Mode and returns to normal operating mode.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 146 147

No comments

ADEMCO Vista-128FB Setup Guide Page 108