ADEMCO Vista-128FB Setup Guide download pdf (Page 95)

VISTA-128BP/VISTA-250BP Installation and Setup Guide

6-2

station (reporting by exception, field 2*09). The

system can be programmed to automatically

arm/disarm in case an employee fails to arm/disarm

manually (auto-arm/auto-disarm).

Open/Close Schedules Definitions

General

The open/close scheduling is controlled by one of three

schedules. Each schedule consists of one time window

for openings and one time window for closings.

There are three types of schedules available: Daily,

Holiday, and Temporary.

Daily Schedule

Each partition can have one daily schedule consisting

of one opening window and one closing window per

day.

Holiday Schedule

A holiday schedule overrides the regular daily schedule

on selected holidays throughout the year.

The opening and closing windows are programmed in

the daily schedule, but the holidays themselves are

defined in Holiday Schedule Programming in the #80

Menu Mode.

Temporary Schedule

The temporary schedule provides a method for the end

user to override the daily and holiday schedules. It

consists of one opening window and one closing

window for each day of the week. The schedule takes

effect for up to one week, after which it is

automatically deactivated.

This schedule is programmed using the #81 Temporary

Schedule Menu Mode.

Additional Schedules

Additional opening and closing schedules can be

programmed using the Time-Driven Event

Programming. For example, a schedule for normal

store openings/closings can be programmed with a

daily open/close schedule, and another open/close

schedule for a lunch hour can be programmed using

the Time-Driven event schedule programming.

Refer to “Time-Driven Events” later in this section for

detailed information.

Open/Close Reports by Exception

The system can help reduce communication traffic to

the central station by using the Open/Close Reports by

Exception feature. The Open/Close by Exception

option suppresses these reports from being sent to the

central station if an arm or disarm is done within the

expected time window. Reports are only sent if the

arm or disarm occurs outside the assigned time

window.

The system keeps a record of all openings/closings in

its event log.

If a disarming occurs during a closing window (for

example, a person who arms the system forgets

something and has to re-enter), the Opening report

(although outside of the opening window) will not be

sent (as long as that disarming occurs within the

closing window).

This option is programmed in partition-specific

program field 2*09.

Example of Open/Close Exception Reporting & Scheduling

The following chart gives an example of how the Open/Close by Exception reporting works.

6:01PM 5:59AM 6AM 9AM 9:01AM 3:59PM 4PM 6PM 6:01PM 5:59AM

Early Opening reports are

sent if system is manually

disarmed before opening

window begins.

Early and Late Opening

and Closing reports are

programmable options

in the Report Code

Programming. They are

not dependent on the

programming of the

Exception Reporting

option.

Opening Window

No reports are sent if

system is disarmed

during this time

window.

If an arming occurs,

a Closing report is

sent to the central

station regardless of

how the Exception

Reporting option is

set.

Auto-disarm delay begins.

Auto-disarm occurs after delay (if

auto-disarm is enabled).

Missed Opening reports are sent if

manual disarming has not

occurred at expiration of opening

window.

Late Opening reports are sent if

disarm occurs after the opening

window expires.

Early Closing reports are sent if

manual arming occurs before the

closing window begins.

Missed Opening/Closing type

reports are programmed in the

Report Code Programming. The

Exception Reporting option

must be set for these to be

sent.

Closing Window

No reports are sent

if system is armed*

during this time

window.

* or disarmed if user

needs to re-enter

premises.

Auto-arm delay begins.

Auto-arm warning begins.

Auto-arm occurs after

warning expires (if auto-arm

is enabled).

Missed Closing reports are

sent if manual arming has

not occurred at expiration of

closing window.

Late Closing reports are

sent if system is manually

armed after the closing

window expires.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 146 147

Comments to this Manuals

No comments

ADEMCO Vista-128FB Setup Guide Page 95

Comments to this Manuals

Related products and manuals for Security access control systems ADEMCO Vista-128FB