ADEMCO VISTA-128B Setup Guide download pdf (Page 104)

VISTA-128B Installation Instructions

17-4

• In field *69 enter the phone number of the paging service for Bypass reports. Up to 17

digits may be entered.

• In field *70 enter the Pager ID number of the paging service for Bypass reports. This is

the PIN number. Up to 10 digits may be entered.

• In field *71 enter the phone number of the paging service for Open/Close reports. Up to

17 digits may be entered.

• In field *72 enter the Pager ID number of the paging service for Open/Close reports. This

is the PIN number. Up to 10 digits may be entered.

• In field *73 enter the phone number of the paging service for System reports. Up to 17

digits may be entered.

• In field *74 enter the Pager ID number of the paging service for System reports. This is

the PIN number. Up to 10 digits may be entered.

• In field *75 enter the phone number of the paging service for Test reports. Up to 17

digits may be entered.

• In field *76 enter the Pager ID number of the paging service for Test reports. This is the

PIN number. Up to 10 digits may be entered.

• In field 1*70 enable the events for the event log.

• In field 1*72 enable the Printer On-Line option. This must be turned on to allow events

to be sent to the pager interface when they occur.

4100APG LED Indications

Below is a table outlining the LED indications:

LED Name

Steady Blinking Off Pulse

Power

OK On Battery (B/U) No Power

Line

Not in use (OK) In Use

Call

Call in Progress Page Retry Idle

Busy

Telephone Busy No Dial Tone OK

Page

Page Fail OK Page OK

Data

No Data Msg Data

Load

No Data Prog Data

TRBL

Trouble OK

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 251 252

No comments

ADEMCO VISTA-128B Setup Guide Page 104