ADEMCO VISTA-128B Setup Guide download pdf (Page 15)

How To Use This Manual

This manual is written to accommodate both the new and the experienced installer of ADEMCO

products. A general description of the entire system is located at the beginning of the manual,

followed by the basics of programming. The wiring and physical setup of the hardware follows.

The sections at the core of the manual include both hardware setup and programming requirements

of each device to make that specific device operational in the system. A checkout procedure is

included at the end of each section. We recommend this method to ensure that each device is working

properly before proceeding to the next section. It must also be used if you are making a particular

addition to the system of one of these devices.

Each of the sections covering the installation of peripheral devices includes the programming for that

device. If you are an experienced user of ADEMCO products, you may choose to wire and then

program the entire system at once. If so, refer to The Mechanics of Programming and Data Field

Descriptions sections after the hardware setup is complete. A blank pull-out programming form is

included with this manual.

Without an understanding of the programming methodology, you will not be able to successfully

perform the required programming in each of these sections. We therefore urge you to read The

Mechanics of Programming section before any programming is performed.

This manual uses various icons to denote critical notes and technical tips to assist you with the

installation of this system. These are easily seen in the left-hand column of the relevant information.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 251 252

No comments

ADEMCO VISTA-128B Setup Guide Page 15