ADEMCO VISTA-100 Service Manual download pdf (Page 35)

ADEMCO VISTA-250FBP/VISTA250FBP-24

250 Zone UL Commercial Fire/Burglary Control Panel

Notification

Appliance

5881

Wireless Receiver

(Max Two)

6139R

32 Character

Red-Alpha

Keypad

4204CF

Supervised

NAC

Module

4293SN

V-Plex Adapter

4944SN

Addressable

Recessed Mount

Contact

Supports Up To 16

Conventional 2-Wire

Smoke Detectors

Supports Up To 64

Conventional 2-Wire

Smoke Detectors

4209U

Group Zoning

Module

V-Plex

Two-Zone

expander

4190SN

V-Plex Two-Zone

Expander

4193SN

Serial Interface

Module

4297

Isolation/

Extender

Module

4190SN

5140MPS - 1*

5140MPS - 2*

Manual Pull Stations

Tamper Switch*

Flow Switch*

Low Temp Switch*

5808LST

Smoke

Detectors

5808LST

Smoke

Detectors

5816

Door/Window

Miniature

Transmitter

VGM (PTVGM)

Vista

Gateway Module

Applications

The ADEMCO VISTA-128FBP control is well suited for a

variety of applications as an integrated fire and burglary

control. A diverse line of ADEMCO initiating devices support

this extremely powerful control. Some of the applications

supported are: medical and professional buildings, churches

or synagogues, office buildings, schools, strip malls, larger

residences and factory or warehouse environments.

Installation

The VISTA-128FBP alarm system has been designed to

mount both quickly and easily. It meets all applicable

requirements for UL commercial fire and burglary installations.

Specifications

Electrical:

• Primary power: 18VAC @ 72VA ADEMCO No. 1451

• Control panel quiescent current draw: 350mA

• Backup battery:

– 12VDC, 12AH min to 34.4AH max

– Lead acid battery (gel type)

• Alarm power: 12VDC, 1.7A max for each notification (bell)

circuit output Total 2.3amps @ 12V

• Aux. standby pwr: 12VDC, 1A max

• Total power: 2.3A at 12VDC, 3.4A at 24VDC from all

sources

• Standby time: 24 hours with 1A standby load using

34.4AH battery

• Fusing: Battery input, aux. and notification (bell) circuit

outputs are protected using PTC circuit protectors. All

outputs are power limited.

• Optional 24-volt power supply, PS 24 Supplies two 24

VFW, 1.7A full wave rectified, unfiltered outputs.

Main Dialer:

• Line seize: Double Pole

• Ringer equiv.: 0.7B

• Formats: ADEMCO Low Speed, ADEMCO 4+2 Express,

ADEMCO High Speed, ADEMCO Contact ID, Sescoa and

Radionics

• Dual phone line capability (using 5140DLM module)

Cabinet dimensions:

• 18”H X 14.5”W X 4.3”D

Environmental:

• Storage temp: -10°C to 70°C

• Operating temp: 0°C to 50°C

• Humidity: 85% RH

• EMI: Meets or exceeds the following requirements:

– FCC Part 15, Class B Device

– FCC Part 68

– IEC EMC Directive

Agency Listings

Burglary:

• UL609 Grade A Local Mercantile Premises and Mercantile

Safe and Vault

• UL611/1610 Grades A, AA, Central Station

• UL365 Grades A, AA Police Connect

Fire:

• UL864/NFPA72 Local, Central Station and Remote Station

• Factory Mutual

• California State Fire Marshal

• MEA

• UL985

5890

Wireless PIR

PassPoint

ECP

Bus

Symphony

Vista-250FBP

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 79 80

Comments to this Manuals

No comments

ADEMCO VISTA-100 Service Manual Page 35

Comments to this Manuals

Related products and manuals for Security access control systems ADEMCO VISTA-100