ADEMCO VISTA-100 Service Manual download pdf (Page 56)

FEATURES:

• Can be used on controls that support up to 250 zones

• Provides up to six Class B supervised zones using external

10k EOL resistors and two Class A supervised zones using

built-in 10k EOL resistors

• Powered from addressable loop or optionally powered from an

external DC power supply to reduce current draw from the

addressable loop

• Each zone is identified by a unique serial number, which is

assigned via on-board DIP switches

• Detects faults an all zones with 400msec of occurrence. Two

Class B zones can be optionally set for fast (10msec)

response via on-board DIP switches

• Provides cover tamper protection, which may be enabled or

disabled via on-board DIP switches

Class B to Class A Zone

Converter Features

• Allows up to two Class B control panel zones to be converted

into Class A zones

• Control panel’s response time to faults on the module’s Class

A zones is equal to the response time of the control panel’s

converted Class B zones plus one msec

• Must be powered from an external 12vdc power supply such

as the 12v auxiliary power output on the control panel

Honeywell’s 4208SNF Remote Point Module

(RPM) is a UL listed eight-zone expander

that provides (6) class B and (2) class A

expansions zones to any Vista Fire/Burg

control panel that supports serial V-Plex

polling loop devices.

4208SNF

UL Listed V-Plex Zone Expander

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 79 80

No comments

ADEMCO VISTA-100 Service Manual Page 56