ADEMCO Accord Installation Manual download pdf (Page 30)

SNOITPOMETSYS

PUORGNOITPOTLUAFED

4emiTtixE=9–1,tcatnoClaniF=0(emiTtixE=1 × .)s01)3(

4.)s01×emiTyrtnE=9–1(emiTyrtnE=2)3(

4eeS—emiTffo-tuClleB=3 6.3elbaT .semiTffo-tuClleB)8(

lanretnIdnadapyeK=2,dapyeK=1,tneliS=0(gninraWtixEteStraP=4

.)srednuoS

)0(

4.)seY=1,oN=0(teStraPniebortSdnaslleBlanretxE=5)1(

4.)seY=1,oN=0(teSthgiNniebortSdnaslleBlanretxE=6)1(

4eeS—tuptuOreggirT=7

stuptuOreggirT—7noitpO

.)3(

4)seY=1,oN=0(teSysaE=8)0(

4)ttaBwoL/liaFsniaM=2,ttaBwoL=1,liafsniaM=0(htiwteStneverP=9)0(

Table 3.6 Group 4 System Options

The zone on soak test will be monitored by the system at all times. If the zone is

activated at a time when it would normally have caused an alarm (e.g. an intruder zone

during the set state), no alarm will be generated. Instead, a soak test activation will be

logged against that zone and the soak test timer will be returned to 14 days. Also an

indication of the activated zone will be shown at the keypad in the unset state.

If the zone is not activated during a period when it would normally have caused an

alarm, the soak test timer will be decreased by one day at midnight each day. If the

soak test counter reaches zero, the soak test for that zone will end and the zone will

return to normal operation automatically.

Programming System Options

System Programming — Group 4 System Options

• The first digit entered is 4 for System Options.

• The second digit is the required system option (1 — 9).

• The third digit is the option value.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 77 78

No comments

ADEMCO Accord Installation Manual Page 30