31
Group 6 — Option 8 Communicator Format
The Accord xpC panel has three communicator format options:
0. Comms disabled.
1. High Speed.
2. Contact I.D.
This option defaults to 1 (High Speed).
0 = Comms Disabled
If Option 8 Communicator Format is set to 0 the panel will not dial-out. Setting
Option 8 Communicator Format to 0 (Comms Disabled) does not erase the Comms
programming. Communication can be restored with the previous programming by
selecting 1-High speed.
1 = High Speed (8 channel)
If Option 8 Communicator Format is set to 1 the panel reports using 8 channel Ademco
Fast Format (see programming group 8).
2 = Contact I.D.
The panel reports using Contact I.D when Option 8 Communicator Format is set to 2.
Contact I.D. transmits event type and event source to the monitoring station (see
Table 3.13).
Group 6 — Option 9 Central Station (ARC) Receiver Handshake
This option has three settings:
0. UK.
1. Belgium.
2. Paris.
This option defaults to 0 (UK).
Comments to this Manuals