ADEMCO Accord Installation Manual Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 78
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 30
23
Group 4 — Option 1 Exit Time
This is the amount of time that the user has to exit the premises after initiating a Full
Set procedure. Entering 411 will set the Exit Time to 10 seconds, 412 = 20 seconds,
413 = 30 seconds, to 419 = 90 seconds.
If Final Contact is required enter 410. The system will only set when a Final Exit zone
is activated after the exit timer has started (infinite exit time).
Note: Exit Times for Part Set and Night Set are fixed at 30 seconds.
Group 4 — Option 2 Entry Time
This is the period the user has to enter the premises and unset the system. Entering 421
will set the Entry Time to 10 seconds, 422 = 20 seconds, to 429 = 90 seconds.
Group 4 — Option 3 Bell Cut-off Time
This is the period the sounders/bells activate after an alarm condition has occurred. To
programme the Bell Cut-off time enter 43 then number 0 — 9, see Table 3.7 Bell
Cut-off Times.
semiTffo-tuClleB
slleBsuounitnoC=0
etunim1=1
setunim2=2
setunim3=3
setunim4=4
setunim5=5
setunim01=6
setunim51=7
setunim02=8
setunim03=9
Note: The system will reset when the Bell Cut-off
Time has expired . Group 7 - Option 9 program-
ming determines the number of times a zone will
activate before it is automatically omitted.
Table 3.7 Bell Cut-off Times
Group 4 — Option 4 Part Set Exit Warning
This option allows the Part Set exit timer to be silent, audible through the keypad, or,
audible through the keypad and internal sounder. Night Set will always have a silent
exit timer but this option will affect the Night Set comfort tone (confirmation of set)
and fault warnings given at the end of the Exit Time. All possible options are shown in
the tables 3.8 – 3.10.
GNINRAWTIXETESTRAP TNELIS044
ENOTTIXE
TLUAF
ENOT
TLUAF
TAENOT
FODNE
EMITTIXE
TROFMOC
ENOT
teStraPenoNenoNylnodapyeKylnodapyeK
teSthgiNenoNenoNylnodapyeKylnodapyeK
Table 3.8 Part Set Exit Warning: 440 Silent
Page view 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 77 78

Comments to this Manuals

No comments