ADEMCO VISTA-250FBP Setup Guide download pdf (Page 82)

VISTA-128FBP/VISTA-250FBP Installation and Setup Guide

6-2

Exception Reports

This option allows the reporting of openings and

closings to the central station only if the arming and

disarming occurs outside of the predetermined opening

and closing time windows. It is set in partition-specific

field 2*09.

The system can be programmed to send Failed to Open

and Failed to Close reports if the partition is not armed

or disarmed by the end of the corresponding time

window.

Limitation of Access of Users by Time

A user’s access to the system can be limited to a certain

time period. Outside this time, that user’s code is

inactive. The system provides up to eight access

schedules, each consisting of two time windows

(typically one for opening, one for closing) for each day

of the week and two time windows for holidays.

The access schedules are programmed in the #80 Menu

Mode, and enabled when a user’s access code is added

to the system.

If a user tries to operate the system outside the

schedule, the alpha keypad displays “Access Denied.”

Time-Driven Events

The system can automatically activate and de-activate

relays at predetermined times to turn lights or other

devices on and off. The Time-Driven events can be

activated at different times in relation to a time

window:

• At the beginning of a time window

• At the end of a time window

• During a time window (on at beginning of window,

off at end)

• At both the beginning and end of the time window

(e.g., to sound a buzzer at the beginning and end of a

coffee break)

• Random time at the start of the time window (occurs

within 30 minutes after the start of the time

window)

• Random time at the end of the time window (occurs

within 30 minutes after the end of the time window)

• Random during the time window (begins within 30

minutes after the start of the time window and ends

within 30 minutes after the end of the time window)

The system can perform the same actions on a daily

basis, or can perform an action only once (e.g., turn on

the porch light this Wednesday at 8:00 PM).

The system also provides up to 20 programmable

“timers” available to the end user for the purpose of

activating output devices at preset times and days.

Time Window Definitions

Scheduled events are based on time windows, (periods

of time) during which an event may take place. The

system supports up to 20 time windows, each defined by

a “Start” time and a “Stop” time.

The windows are shared by all 8 partitions, and are

used when programming the various schedules

(open/close, limitation of access), as well as for Time-

Driven event control.

Scheduling Example

A store that has the following hours:

Monday to Friday 9am to 6pm

Saturday 10am to 4pm

Sunday Closed

Holidays Closed

The owner desires the following time windows to allow

time for employees to arm or disarm the system:

Monday to Friday Open (disarm) 8am to 9am

Close (arm) 6pm to 6:30pm

Saturday Open (disarm) 9am to 10am

Close (arm) 4pm to 4:30pm

Sunday & Holidays Closed

For this schedule, the four time windows need to be

programmed:

Window Start Stop Purpose

1 8am 9am Monday-Friday open window

2 9am 10am Saturday open window

3 4pm 4:30pm Saturday close window

4 6pm 6:30pm Monday-Fri. close window

Using the #80 Menu Mode, the installer can program

open/close schedules by assigning a time window to a

day of the week (windows are entered as 2-digit entries)

Mon Tue Wed Thu Fri Sat Sun Hol

Op/Cl Op/Cl Op/Cl Op/Cl Op/Cl Op/Cl Op/Cl Op/Cl

01/04 01/04 01/04 01/04 01/05 02/03 00/00 00/00

NOTE: 00 is entered for those days on which the store

is closed.

Employees can arm and disarm the system, when

programmed, within the open and close time windows

without causing a report to be sent to the central

station (reporting by exception, field 2*09). The system

can be programmed to automatically arm/disarm in

case an employee fails to arm/disarm manually (auto-

arm/auto-disarm).

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 135 136

Comments to this Manuals

No comments

ADEMCO VISTA-250FBP Setup Guide Page 82

Comments to this Manuals

Related products and manuals for Security access control systems ADEMCO VISTA-250FBP