ADEMCO VISTA 10 Setup Guide download pdf (Page 21)

Zone Type Definitions

You must assign a zone type to each zone, which defines the way in which the system responds to

faults in that zone. Zone types are defined below.

Zone Type Description

Type 00

Zone Not Used

Program a zone with this zone type if the zone is not used.

Type 01

Entry/Exit Burglary #1

• Assign to zones that are used for primary entry and exit.

• Provides entry delay when zone is faulted if control is armed in the Away, Stay,

or Night-Stay modes.

• No entry delay provided when the panel is armed in the Instant/Maximum mode.

• Entry delay 1 is programmable.

• Exit delay begins whenever the control is armed, regardless of the arming mode

selected, and is programmable.

Type 02

Entry/Exit Burglary #2

• Assign to zones that are used for entry and exit and require more time than the

primary entry/exit point.

• Provides a secondary entry delay, in same manner as entry delay #1.

• Entry delay 2 is programmable.

• Exit delay is same as described for Type 01.

Type 03

Perimeter Burglary

• Assign to all sensors or contacts on exterior doors and windows.

• Provides an instant alarm if the zone is faulted when the panel is armed in the

Away, Stay, Night-Stay, Instant or Maximum modes.

Type 04

Interior Follower

• Assign to a zone covering an area such as a foyer, lobby, or hallway through

which one must pass upon entry (to and from the keypad).

• Provides a delayed alarm (using the programmed entry 1 time) if the entry/exit

zone is faulted first. Otherwise this zone type gives an instant alarm.

• Active when the panel is armed in the Away mode.

• Bypassed automatically when the panel is armed in the Stay or Instant modes;

if armed in Night-Stay mode, zones assigned to zone list 05 (night-stay zone list)

are not bypassed when system armed in Night-Stay mode.

Type 05

Trouble by Day/

Alarm by Night

• Assign to a zone that contains a foil-protected door or window (such as in a store),

or to a zone covering a sensitive area such as a stock room, drug supply room, etc.

• Can also be used on a sensor or contact in an area where immediate notification

of an entry is desired.

• Provides an instant alarm if faulted when armed in the Away, Stay, Night-Stay,

Instant or Maximum (night) modes.

• During the disarmed state (day), the system will provide a latched trouble

sounding from the keypad (and a central station report, if desired).

Type 06

24-hour Silent Alarm

• Usually assigned to a zone containing an emergency button.

• Sends a report to the central station but provides no keypad display or sounding.

Type 07

24-hour Audible Alarm

• Assign to a zone that has an emergency button.

• Sends a report to the central station, and provides an alarm sound at the keypad,

and an audible external alarm.

Type 08

24-hour

Auxiliary Alarm

• Assign to a zone containing an emergency button, or to a zone containing

monitoring devices such as water or temperature sensors.

• Sends a report to the central station and provides an alarm sound at the keypad.

(No bell output is provided.)

Type 09

Supervised Fire

• Provides a fire alarm on short circuit and a trouble condition on open circuit. A

fire alarm produces a pulsing bell output.

• This zone type is always active and cannot be bypassed.

Type 10

Interior w/Delay

• Provides entry delay (using the programmed entry time), if tripped when the

panel is armed in the Away mode.

• Entry Delay 1 begins whenever sensors in this zone are violated, regardless of

whether or not an entry/exit delay zone was tripped first.

• Bypassed when the panel is armed in the Stay or Instant modes; if armed in

Night-Stay mode, zones assigned to zone list 05 (night-stay zone list) are not

bypassed when system armed in Night-Stay mode.

3-3

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 71 72

Comments to this Manuals

No comments

ADEMCO VISTA 10 Setup Guide Page 21

Comments to this Manuals

Related products and manuals for Security access control systems ADEMCO VISTA 10