ADEMCO VISTA 10 Setup Guide download pdf (Page 57)

Keypad Functions

The following is a brief list of system commands. For detailed information, see the User's Manual.

Voice Keypads

The 6150V/6160V Voice Keypads provide the following features:

• Message Center, which lets the user record and playback one message.

• Voice Status, which can announce system status by using the STATUS key.

• Voice Chime, which can alert users to the opening of doors/windows while the system is disarmed.

Refer to the User Guide for specific procedures for activating and using these features.

Keypad Commands

Function Description

Silence alarms Pressing any key will silence the keypad sounder for 10 seconds. Disarming the

system will silence both keypad and external sounders.

Quick Arm If enabled (field ∗21), you can press [#] in place of the system's security code, plus

the desired arming key (Away, Stay, Instant, Maximum)

Single-Button arming If programmed (*57 Function Key menu mode), lettered keys A-D can be used for

arming, using options 3-AWAY, 4-STAY, 5-NIGHT-STAY, or 6-Step-Arming

If used, no security code is required to arm the system.

Alarm Memory When the system is disarmed, any zones that were in an alarm condition during the

armed period will be displayed. To clear this display, simply repeat the disarm

sequence (enter the security code and press the OFF key) again.

Arming Away Enter code + AWAY [2] or simply press appropriate lettered key on the keypads (see

“Single-Button Arming” above). If the “Auto-Stay Arm” feature is enabled (field *84)

and the entry/exit door is not opened and closed within the programmed exit delay

time, the system will automatically arm in STAY mode if armed from a wired

keypad (non-RF device). If the door is opened and closed within the exit delay

period, the system arms in AWAY mode.

Arming Stay Enter code + STAY [3] or simply press appropriate key on the keypads (see “Single-

Button Arming” above). See “Arming Away” above for Auto-Stay arming feature.

Arming Night-Stay Enter code + STAY [3] + STAY [3] or simply press appropriate key on the keypads

(see “Single-Button Arming” above).

Arming Instant Enter code + INSTANT [7].

Arming Maximum Enter code + MAXIMUM [4] or simply press appropriate lettered key on the

keypads (see “Single-Button Arming” above).

Disarming Enter code + OFF [1]. If entry delay or an alarm is active, you do not need to

press OFF.

Bypassing Zones Enter code + BYPASS [6] + zone number(s).

Forced (Quick) Bypass To automatically bypass all faulted zones, use the “Quick Bypass” method. Enter

code + BYPASS + [#], then wait for all open zones to be displayed. Arm when

display indicates “ZONE BYPASSED” and “READY TO ARM”.

Chime Mode Enter code + CHIME [9]. To turn chime off, enter code + CHIME again.

Activate Output Devices If relay outputs are used, two keypad entries available to the user are included. If

programmed, these entries can be used to manually activate or deactivate the

device(s) for starting or stopping some action, such as turning lights on or off, etc.

These keypad entries are:

[Security Code] + # + 7 + [2-digit Device #] activates (starts) that device.

[Security Code] + # + 8 + [2-digit Device #] deactivates (stops) that device.

SUMMARY OF ARMING MODES

Features for Each Arming Mode

Arming Mode

Exit Delay Entry Delay Perimeter Armed Interior Armed

AWAY Yes Yes Yes Yes

STAY Yes Yes Yes No

NIGHT-STAY Yes Yes Yes only those zones

listed in Night-

Stay zone list

INSTANT Yes No Yes No

MAXIMUM Yes No Yes Yes

6-5

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 71 72

Comments to this Manuals

No comments

ADEMCO VISTA 10 Setup Guide Page 57

Comments to this Manuals

Related products and manuals for Security access control systems ADEMCO VISTA 10