ADEMCO VISTA 10 Setup Guide download pdf (Page 45)

Zone List Overview (∗

∗∗

∗81 Menu Mode)

Zone lists let you group individual zones for use with certain system actions. The following table

shows the available zone lists and their purposes:

List No. Used for…

1, 2 general purpose

3 chime-by-zone

4 cross zones

5 night stay zones

6 general purpose

VISTA-10PSIA: dial delay disable

7 general purpose

VISTA-10PSIA: unlimited reports

8 general purpose

9 zones that activate Pager 1

Zone List Programming

Zone List programming involves:

1. Selecting an appropriate zone list number;

2. Adding the desired zone numbers to be included in that list.

Start Zone List Program Mode by pressing ✱

while in Data Programming mode. The following

prompts are displayed

*81 Menu Mode

PROMPT

VALID ENTRIES EXPLANATION

Zone List No.

(00 = Quit) 01

Enter the Zone List Number to program (or 00 to end these entries).

01-09 = zone list number

[∗] to continue

01 Enter Zn Num.

(00 = Quit) 00

Enter each zone number followed by [∗] to add each zone to the zone list.

01-06 = wired zones; 09-24 = wireless zones; 49-56 = button zones

91 = addr. device report enable (Enter a report code for zone 91 to enable addressable device

reporting.

92 = duress report enable (Enter a report code for zone 92 to enable duress reporting)

95, 96, 99 =emergency zones

00 to continue

IMPORTANT: Do not include fire zones in zone lists that are used to STOP device actions.

01 Del Zn List?

0 = No 1 = Yes 0

To delete the zone list, enter 1. All zones in the zone list will be deleted automatically and

the system returns to the Zone List No. prompt.

To save the zone list, enter 0.

[∗] to continue

01 Delete Zone?

0 = No 1 = Yes 0

To save the entire zone list, enter 0 and the system returns to the Zone List No. prompt.

To delete a zone or zones in a zone list enter 1 to continue.

[∗] to continue

01 Zn to Delete?

(00 = Quit) 00

Enter each zone to be deleted from the list followed by [∗] to accept each zone.

01-64 = zones to be deleted from list

00 when done to return to the Zone List No. prompt

NOTES:

• Any list may include any or all of the system's zone numbers.

• A zone list can be assigned to more than one output relay.

• When creating zone list 4 for cross zoning, include only zones assigned to zone types 3, 4, or 5. Do

not include zones that have delays (entry/exit zones, interior w/delay) or 24-hour zones, as these

zone types may produce unpredictable operation and may not function as intended.

See field *85 for

Cross Zone Timer option.

• Zone List 6: VISTA-10PSIA: See field *50 for Dial Delay Disable option.

• Zone List 7: VISTA-10PSIA: See field *93 for Unlimited Reports option.

5-9

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 71 72

Comments to this Manuals

No comments

ADEMCO VISTA 10 Setup Guide Page 45

Comments to this Manuals

Related products and manuals for Security access control systems ADEMCO VISTA 10