ADEMCO VISTA 10 Setup Guide download pdf (Page 41)

INPUT S/N L

AXXX-XXXX –

Manually enter the serial number printed on the label for the wireless key or press and

release the button to transmit its serial number.

Press [∗] to accept the serial number. The system will check for duplicate.

If necessary, press the [#] key to back up without saving, and re-enter the serial number.

Use the [A] key to move forward within the screen, and the [B] key to move backward.

XMIT TO CONFIRM

PRESS ✱ TO SKIP

If “Yes” was entered at the SET TO CONFIRM? prompt (first prompt following entry into

the ∗58 Expert Programming Mode), this display appears.

Confirm serial and loop numbers by activating the wireless key. Refer to the “Confirm”

prompt described in *56 Menu mode above for more information on confirming the serial

number.

If the serial number transmitted matches the serial number entered, the keypad will beep 3

times and will return you to the ENTER START ZONE NUMBER prompt to enter the

starting zone for the next wireless key.

Or you can return to *58 Menu mode by pressing 00 at the Zone Number prompt.

IMPORTANT: When confirmed, the key is not active for arming/disarming until it is

assigned to a user number (using the assigning attributes command, attribute “4”). See

System Operation section.

[∗] to skip confirm.

Wireless Key Predefined Default Templates

YOU MUST

PROGRAM

THIS BUTTON

LOOP 4

LOOP 3

ENROLL AS "BR"

LOOP 1

LOOP 2

OFF

5804-001-V1

5804 Wireless Key Transmitter

Note:

These transmitters

are not intended for

use in UL

installations.

LOOP 3

LOOP 1

LOOP 2

LOOP 4

(YOU MUST

PROGRAM

THIS BUTTON)

RED/YELLOW

LED

•

GREEN/YELLOW

LED

ENROLL AS "BR"

5804BD-007-V0

5804BD 2-Way Wireless Key Transmitter

For 5804

For 5804BD

TEMPLATE 1 Loop Function Zone Type TEMPLATE 4 Loop Function Zone Type

1 No Response 23 1 No Response 23

2 Disarm 22 2 No Response 23

3 Arm Away 21 3 Arm Away 21

4 No Response 23 4 Disarm 22

TEMPLATE 2 Loop Function Zone Type TEMPLATE 5 Loop Function Zone Type

1 No Response 23 1 No Response 23

2 Disarm 22 2 Arm Stay 20

3 Arm Away 21 3 Arm Away 21

4 Arm Stay 20 4 Disarm 22

TEMPLATE 3 Loop Function Zone Type TEMPLATE 6 Loop Function Zone Type

1 24-hour audible 7 1 24-hour audible 7

2 Disarm 22 2 Arm Stay 20

3 Arm Away 21 3 Arm Away 21

4 Arm Stay 20 4 Disarm 22

5-5

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 71 72

Comments to this Manuals

No comments

ADEMCO VISTA 10 Setup Guide Page 41

Comments to this Manuals

Related products and manuals for Security access control systems ADEMCO VISTA 10