ADEMCO Vista-20HW Troubleshooting Guide download pdf (Page 12)

100

This section provides instructions for mounting the control cabinet, and

installing the cabinet lock (if used). Also included in this section are w

instructions for the following

“ Installing the main PC board.

● Standard phone line connections.

“ Installing the back-up battery in the cabinet.

c Connecting the AC transformer.

s Making earth ground connections.

Mounting the Cabinet

Mount the control cabinet to a sturdy wall using fasteners or anchors (not

supplied), in a clean, dry area which is not readily accessible to the general

public. Four mounting holes are provided at the back of the cabinet.

Installing the Lock (if used)

Use an Ademco No. N6277 Cam

(Retainer Clip).

Note: The cabinet can be closed

screws in the cover’s edge.

Lock and No. N6277–1 Push-On Clip

and secured wit bout a lock by using 2

LUXEU

RErumn CLw

‘. :

. . .

‘.. +

CAmm Doon 90?70!4

Figure 1. Installing The Cabkwt Lock

Remove the cabinet door. It is

easily removable for servicing

and is easily re-installdd.

Remove the lock knockout

from the control cabinet door.

Insert the key into the lock.

Position the lock in the hole w

making certain that the latch

will make contact with the

latch bracket when the door is

closed.

Hold the lock steady, and in-

sert the retainer clip into the

retainer slots. Position the

clip as illustrated in order to

permit easy removal.

-12-

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 99 100

Comments to this Manuals

No comments

ADEMCO Vista-20HW Troubleshooting Guide Page 12

Comments to this Manuals

Related products and manuals for Security access control systems ADEMCO Vista-20HW