ADEMCO Vista-20HW Troubleshooting Guide download pdf (Page 6)

HOW TO USE THIS MANUAL

This manual is written to accommodate both the new and the experienced installer

of Ademco products. A general description of the entire system is located at the

beginning of the manual. The wiring and physical setup of the hardware follows.

The sections at the core of the manual include both hardware setup and

programming requirements of each device to make that specific device operational in

the system. A checkout procedure is included at the end of each section. We

recommend this method to ensure that each device is working properly before

proceeding to the next section.

It must also be used if you are making a particular

addition to the system of one of these devices.

Each of the sections covering the installation of peripheral devices includes the

programming for that device. Without an understanding of the programming of the

system, you will not be able to successfully perform the required programming in

each of these sections. We therefore urge you to read Section 2. Mechanics of

Programming before any programming is performed.

If you are an experienced user of Ademco products, you may choose to wire and then

program the entire system at once.

If so, refer to Section 4: Mechanics of

Programming and Section 19. Data Field Descriptions after the hardware setup is

complete. A blank pull-out programming form is included with this manual.

This manual uses various icons to denote critical notes and technical tips to assist

you with the installation of this system. These are easily seen in the left-hand

column of the relevant information.

-6-

1 2 3 4 5 6 7 8 9 10 11 ... 99 100

No comments

ADEMCO Vista-20HW Troubleshooting Guide Page 6