ADEMCO Vista-20HW Troubleshooting Guide download pdf (Page 75)

100

*56

Zone 17 enteredT

ZnZTPRC In: L

17 091 10 AW:-

ZONE ASSIGNMENT/ALARM REPORT CODES

REFER TO THE ZONE ASSIGNMENT T)4.BLE FOR *56 IN THE

CENTERFOLD PROGRAMMING FORM .

This is an interactive menu mode that is used to program zone

numbers, zone types, partition numbers, alarm and report codes, and

to identify the type of loop input device. This mode can also be used

for entering Alpha descriptors for zones (we recommend entering

descriptors in menu mode *82.

Upon entry menu mode *56, the following is displayed:

Zone Number (Zn): Enter the zone number that you wish to

program (or [0][0] to leave zone programming).

Press [*]. A summary display will come up, showing the status of that

zone’s program.

If it is programmed satisfactorily, press [#] to back up one step and

enter another zone number, if desired.

If the zone is not programmed, or you want to change it, press [*]. A

prompt for Zone Type will appear.

J ZoneNumber

m listedbelOw

Zone Type (ZT): Each zone must be assigned to a zone type, which

defines the way in which the system responds to faults in that zone.

Enter the zone type code (or change it, if necessary). Zone types are

00= NotUsed

06= 24 Hr Silent

10. Interiorw/Delay

01 = Entry/Exit#1

07= 24 HrAudible

23. No Alarm

02= Entry/.Exit#2 08=24 HrAux

Response

03 = Perimeter

09= FireW/venf.

24= SilentBurglary

04= interiorFollower

05= TroubleDay/AlarmNight

Default values for zones 01 to 08 are:

Zone No.(Zn): 01

03 04 05 06

07 08

Zone Type Default 09 01

03 03 03 03 03 03

Partition Default

1 1

1 1 1 1

1 1

Response Time

Default *

1 1

1 1 1 1

1 1

x ulflfor response time

= 350 msec.

Partition

When the display shows the zone type you want, press [*I to advance

to...

Partition No. (P) (Default = [1].

Enter”1” or “2”.

Press [*] to advance to...

Report Code (RC): The report code consists of 2 hexadecimal digits,

each in turn consisting of 2 numerical digits. For example, for a report

code of “3C”, enter [0][3] for “3” and [1][2] for “C”.

Enter the numbers and press [*] to advance to...

Input Device (In): For the hardwired zones of the VISZ’A-20HW

(HW), the auxiliary wired expansion zones on a 4219 or 4229 (AW),

the Input Device types are automatically displayed (Panic, Duress,

and Tamper inputs are not applicable).

When all is okay, press [*] to advance to...

-75-

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 99 100

Comments to this Manuals

No comments

ADEMCO Vista-20HW Troubleshooting Guide Page 75

Comments to this Manuals

Related products and manuals for Security access control systems ADEMCO Vista-20HW