ADEMCO Vista-20HW Troubleshooting Guide download pdf (Page 68)

100

Press *9O EVENT LOGGING

•1

O= None; 1 = Alarm/Alarm Restore; 2 = Trouble/Trouble Restore;

4 = Bypass/Bypass Restore; 8 = Open/Close. Default is “3”.

Exampku To select “Alarm/Alarm Restore”, and “Open/Close”, enter 9 ~

(1+ 8); to select all, enter #15.

Note: System messages are logged when non-zero selections are made.

See Fields *89 and *9O in Section 17. DATA FIELD DESCRIPTIONS

for a more detailed description of Event Logging.

Press W12.PHONE LINE MONITOR ENABLE.

•1

O= Not used (default)

1 = Local keypad display only when phone line is faulted.

2 = Local keypad display plus keypad trouble sound when line is faulted.

Each partition turns off its own trouble sound. No automatic timeout.

3 = Same as “2” above plus Device No. 2 STARTS. If either partition is

NOTE:

Option 3 may be used

armed, external sounder activates. External sounder will be turned off

by normal bell timeout, or by security code plus OFF from either

even if a relay unit or

Powerline carrier device

partition

(itdoes not have to be the one that was armed).

Device number 2 must either be programmed to be STOPPED in field

is not connected to the

*8O or STOPPED

by entry of sectity code + # + 8 + 2. Partition in

control.

*8O should be set to “O”for STOP.

Press *93 NUMBER OF REPORTS IN ARMED PERIOD

❑

“O” limits reports to a total of 10 per code; “1” allows an unlimited

number of al~ plus alarm restore-reports. “Defaultis O.

Enter “1” for UL installations.

Press *94 DOWNLOAD PHONE NUMBER

11111111111

Enter up to 12 digits;

O-9, # +11 for “w, # + 12 for “#”, # + 13 for a pause. Do not fill unused

spaces. End field by entering “*”. To clear entries, press *94*.

Press *95 RING DETECTION COUNT FOR DOWNLOADING

—

Refer to the chart below and program this field accordingly.

*96

INITIALIZE DOWNLOAD ID AND SUBSCRIBER ACCT. No.

FOR DOWNLOADING (No data entry required)

This completes the commwzicafion programming. Exit the programming modeby keying*9.

Referto Section 19. TESTING THE SYSTEM

to check system operation.

Voice Answering

Module

Machine

Downloading

Field *95 ProL

“L?

Yes

No Setfor value otherthan “O”(1-15).

This willenablethe controlpanel to

answerthe phonecall. Otherwise,it

won’tbe possibleto accessthe Module.

Yes Yes

No Setfor a valuehigherthan the number

of ringsfor whichthe answering

machineis set. Example: if machineis

setfor 4 rings,use value 5 or higher.

This is recommendedso that the Voice

Modulecan stillbe accessedif the

answering machineis turned off and

doesnot answerthe phonecall.

Yes

Setfor value otherthan “O”(1-15).

Yes Yes

Yes

“15”to bypass answeringmachine.

No No Enter“O”

No Yes No

Enter“O”

No No

Yes

Enter 1–15

No Yes

Yes

Enter 15

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 99 100

Comments to this Manuals

No comments

ADEMCO Vista-20HW Troubleshooting Guide Page 68

Comments to this Manuals

Related products and manuals for Security access control systems ADEMCO Vista-20HW