ADEMCO Vista-20HW Troubleshooting Guide download pdf (Page 70)

100

Type 06

24-hour Silent Alarm

Type 07

24-hour Audible Alarm

Type 08

24-hour

Auxiliary Alarm

Type 09

Supervised Fire

(With Verification on

Zone 1)

Type 10

Interior w/Delay

Type 23

No Alarm Response

Type 24

Silent Alarm

This zone type sends a report to the Central Station but provides no keypad

display or sounding. This zone type is usually assigned to a zone containing

an Emergency button.

This zone type sends a report to the Central Station, and provides an alarm -

sound at the keypad, and an audible external alarm. This zone type is usually

assigned to a zone that has an Emergency button.

This zone type sends a report to Central Station and provides an alarm sound

at the keypad. (No bell output is provided). This zone type is usually

assigned to a zone containing a button for use in personal emergencies, or to a

zone containing monitoring devices such as water or temperature sensors, etc.

This zone type provides a fire alarm on short circuit and a trouble condition

on open circuit. The bell output will pulse when this zone type is alarmed.

This zone type is always active and cannot be bypassed. This zone type can

be assigned to a control panel basic wired zone, any zone in a wired

zone expansion module, or wireless zones. When used with zone 1 on

the panel, 2-wire smoke detectors can be used. For an explanation of the

“verification” function, refer to the Operation paragraph in Section 5 under

Wiring 2-Wire Smoke Detectors To Zone 1.

Note: Only hardwired zone 1 can be programmed as a fire zone in UL

installations. However, any wireless zone can be used as a fire

zone.

This zone type gives entry delay #1 (using the programmed entry time), if

tripped when the panel is armed in the Away mode. Entry delay begins

whenever sensors in this zone are violated, regardless of whether or not an

entrylexit delay zone was tripped fwst. iVo entry delay is provided if tripped

when the panel is armed in the Maximum mode. Exit delay is present for any

arming mode. This zone type is bypassed when the panel is armed in

the Stay or Instant modes.

This zone type can be used on a zone when an output relay action is desired, w

but with no accompanying alarm (e.g., lobby door access).

This zone type provides an instant alarm, with NO audible indication at any

keypad or external sounder, if the zone is faulted when the system is armed

in the AWAY, STAY, INSTANT, or MAXIMUM modes. This zone type is

usually assigned to all sensors or contacts on exterior doors and windows

where audible notification is NOT desired. A report is sent to the Central

Station.

-70-

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 99 100

Comments to this Manuals

No comments

ADEMCO Vista-20HW Troubleshooting Guide Page 70

Comments to this Manuals

Related products and manuals for Security access control systems ADEMCO Vista-20HW