ADEMCO Vista-20HW Troubleshooting Guide download pdf (Page 74)

100

-4ti

*47

*48

-9

*5O

*51

*52

*53

..,.

SECONDARY SUBS ACCOUNT. No. (Partition. 2)

1~/ SecondW Receiver.

See notes previously.

PHONE SYSTEM SELECT Default is O.

•1

Enter 1 digit. If Central Station Receiver is not on WATS line:

O= Pulse Dial, 1 = Tone Dial.

If Central Station Receiver is on WATS line:

2 = Pulse Dial, 3 = Tone Dial

REPORT FORMAT

Primary

❑

Secondary❑

Determine which format is to be used to report to the central station.

Enter 1 digit (O-9).

O= 3+1; 4+1 ADEMCO Lo Speed Standard (this is the default)

1 = 3+1; 4+1 Radionics Standard

2. 4+2 ADEMCO Lo Speed Standard

3 = 4+2 Radionics Standard

6. 4+2 ADEMCO Express

7 = ADEMCO Contact ID Reporting

8 = 3+1; 4+1 ADEMCO Lo Speed Expanded

9 = 3+1; 4+1 Radionics Expanded

(Enter *as the 4th digit of X3 through *46, if 3+1 dialer reporting is

to be used.)

For an explanation of these formats, see Section 15. SYSTEM

COMMUNICATION .

IVote: The maximum number of alarm and alarm restore reports

during one armed period is determined by field *93.

SPLIT/DUAL REPORTING

Enter Oto disable (Backup report only). This is the default.

TO PRIMARY

TO SECONDARY

Alarms,

Restore,Cancel

Others

2= All exceptOpen/Close,Test

Open/Close,Test

3= Alarms, Restore,Cancel

4= All exceptOpen/Close,Test

All

5= All

All

15-SECOND DIALER DELAY (BURGLARY)

If selected, will provide 15-second delay of burglary alarm report to

the central station. Allows time for subscriber to avoid a false alarm

transmission. Enter Ofor no or 1 for yes. Default is O(no delay).

Must be “O”for UL installations.

PERIODIC TEST REPORT

•1

Select the desired test report interval.

O= none; 1 = 24 hours; 2 = weekly; 3 = 30 days. Default is O (none).

Test Report Code entered in field *64 is sent.

Reports with Partition 1 Subscriber No.

TEST REPORT OFFSET

This is the time to first report from programming or downloading.

O=24 hours; 1 = 6 hours; 2 = 12 hours; 3 = 18 hours. Default is 2.

SESCOA/RADIONICS SELECT

❑

O= Radionics (O-9, B-F reporting)

1 = SESCOA (O-9 only reporting)

Select Ofor all other formats. Default is O.

-74-

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 99 100

Comments to this Manuals

No comments

ADEMCO Vista-20HW Troubleshooting Guide Page 74

Comments to this Manuals

Related products and manuals for Security access control systems ADEMCO Vista-20HW