ADEMCO Vista-20HW Troubleshooting Guide download pdf (Page 82)

● Command the System to Upload a Copy of its Resident Program to the

office.

. Read: Arming Status, AC Power Status, Lists of Faulted Zones, Bypassed

Zones, Zones Currently in Alarm, Zones Currently in Trouble.

Notes:

After the control and the PC have established valid communication, each

keypad on the system will become inactive and will display “CC” or

“MODEM COMM.”. The control, however, will still be scanning its zones and

looking for alarms. If an alarm does occur, after communication is broken off

alarms are sounded and the proper dialer reports are sent to the central

station. The keypads will become active afler the download communication is

terminated. The detailed operation of the download functions is covered in

the installation instructions for the V-LINK@ Downloading Software

Diskette.

Remote Progr

amming Advisory Notes

● Alarm and trouble reporting may be delayed during the time that the

system and the Downloader are linked to each other following a valid

exchange of codes, but the proper message will get through to the Central

Station after the link is broken.

. Keypad entries are ignored during the time interval stated above.

. A copy of the program downloaded may be produced from the IBM PC

compatible computer, using the product’s internal report generator, when

an optional printer is connected (consult your PC manual for proper

printer and connections).

. Program Upload or Download Time—Approximately one minute fifteen

seconds for a complete program.

-82-

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 99 100

No comments

ADEMCO Vista-20HW Troubleshooting Guide Page 82